Dynamic vs static QR codes: the difference and which to use
A static QR code holds its content for good; a dynamic one points to a link you can change and track. When to use each, and what each costs.
Every QR code is either static or dynamic, and you cannot tell which by looking at it. The difference shows up later: when the menu changes, when the web address moves, or when you want to know how many people scanned.
This guide explains how each type works, when to pick one over the other, and what to check before you print a few thousand of them.
The short answer
A static QR code holds its content directly in the pattern. Scan it and the phone reads the web address, Wi-Fi details or text straight from the dots. Nothing sits in between.
A dynamic QR code holds a short link. Scan it and the phone opens the short link, which sends the person on to the real destination. Because the short link can be pointed somewhere new, the destination can change after the code is printed, and each scan can be counted along the way.
| Static QR code | Dynamic QR code | |
|---|---|---|
| What the code holds | The content itself | A short link |
| Change the destination after printing | No | Yes |
| Count scans | No | Yes, by date, place and device |
| Works without the service | Yes | No, the short link has to keep working |
| Pattern density | Grows with the content | Stays simple, since the short link is short |
| Account needed | No | Yes |
| Typical cost | Free | Free to paid, depending on the service |
How a static QR code works
The data is the code. A static code for https://example.com/menu stores those characters in its pattern. A static Wi-Fi code stores the network name, security type and password. A contact card code stores the name, phone number and email.
That has three effects:
- It cannot be changed. To point it somewhere else, you make a new code and print it again.
- It cannot be tracked by the code itself. The phone goes straight to the content, so no service in between counts the scan. Your website analytics may see the visit, but it cannot tell a scan from any other visit unless you added UTM tags to the address.
- It depends on nothing but itself. As long as the content is still valid, the code works. No account, no subscription and no company has to stay in business.
Some content can only be static. A Wi-Fi code has to be read by the phone directly so it can join the network, and the same goes for a contact card or a calendar event that the phone adds itself.
How a dynamic QR code works
A dynamic code stores a short link such as siz.la/menu26. When someone scans it:
- The phone opens the short link.
- The short link records the scan.
- The person is sent to the destination you set.
All of that happens in a moment, and the person sees only the final page.
Editing the destination
The code never changes, but the short link behind it can. That makes a dynamic code the right choice for anything printed that might go out of date:
- A restaurant menu that changes with the seasons
- A product label that should point to the newest manual
- A poster for an event that sends people to tickets before the date and to photos after
- A business card that should keep working after your website moves
In siz.la, you open the code, change the destination and save. The printed code now opens the new page.
Scan tracking
Because each scan passes through the short link, it can be counted. siz.la shows scans for each code, counted apart from ordinary clicks on the same link, with breakdowns by day, country, city, device, browser and language. That tells you which flyer, table or shop window is actually getting scanned.
A simpler pattern
A short link has few characters, so the QR pattern has fewer, larger dots. That means a dynamic code can be printed smaller, or scanned from farther away at the same size, than a static code holding a long address. The QR code size guide goes into the numbers.
When to use each
Use a static code when
- The content is Wi-Fi details, a contact card, a calendar event or plain text.
- The destination will never change, such as your main homepage.
- You do not need to know how many people scanned.
- You want a code that keeps working no matter what happens to any service.
Use a dynamic code when
- The code goes on anything printed in quantity, where a reprint would be expensive.
- The destination might change, or you might want to reuse the printed material for a new campaign.
- You want to count scans, compare placements or report results.
- The destination address is long, and you want a simpler pattern.
For most marketing print (flyers, packaging, posters, table tents, menus), dynamic is the safer choice. For a Wi-Fi sign in your own office, static is simpler.
What happens if the service shuts down
This is the real tradeoff. A static code keeps working forever, because it depends on nothing. A dynamic code works only as long as its short link does.
If the company behind a dynamic code closes, or deletes your account, the short link stops answering and every printed code that uses it stops with it. Some services also turn off dynamic codes when a trial or subscription ends. Before you print, read what the service says happens to your codes if you stop paying.
On siz.la, if a paid plan ends, the account moves to the free plan and its QR codes keep sending people where they did. Reaching a plan's monthly limit only stops new codes from being made; the existing ones keep working. A code stops when you delete it, when you set it to stop on a date or after a number of scans, or if it breaks the rules for what links may point to.
Using your own domain
You can reduce the risk further by putting dynamic codes on your own domain, such as go.yourbrand.com/menu instead of a shared short domain. siz.la lets you connect a custom domain to your account. The printed codes then carry your address. If you ever move to another service, you can point the domain there and set up the same paths, and the codes already in circulation keep working.
Cost
Static codes are free to make with almost any generator, including the siz.la QR code generator, which needs no sign-up and lets you download PNG, SVG or a print-ready PDF.
Dynamic codes need an account, because something has to keep the short link and count the scans. Many services charge for them. On siz.la, saving a code to a free account makes it dynamic, so you can change where it points and see scans by city and device. Paid plans raise the monthly limits and add team features. See pricing for what each plan includes.
Switching from static to dynamic
You cannot turn a printed static code into a dynamic one. If you have static codes in circulation and want tracking or editing, make a new dynamic code and replace the printed ones as they run out. On anything you print from now on, start with dynamic.
FAQ
Can I tell if a QR code is static or dynamic?
Scan it and look at the address your phone shows before opening it. If it is a short link on a link-shortening or QR service, the code is dynamic. If it is the full destination, Wi-Fi details or text, it is static.
Do dynamic QR codes expire?
Not on their own. They keep working as long as the short link behind them does. See do QR codes expire for every reason a code can stop.
Are dynamic QR codes slower to scan?
The scan itself is the same speed, and often faster, since the pattern is simpler. The redirect adds a moment before the page opens, which most people do not notice.
Can I change a static QR code after printing?
No. The content is fixed in the pattern. To send people somewhere else, you need a new code.
Is a dynamic QR code free on siz.la?
Yes. Save a code to a free account and it becomes dynamic, with an editable destination and scan counts. Paid plans add higher limits and team features.