Guides 7 min read

Do QR codes expire? How long they last and why some stop working

Static QR codes never expire. Dynamic ones last as long as their short link does. Here is every reason a QR code stops working, and how to prevent it.

By The siz.la team

A QR code is a printed pattern, and a pattern cannot expire. Yet people scan old codes every day and land on an error page. The code did not run out; something it depends on did.

Whether a code keeps working comes down to what type it is and what it points to. This guide covers both, lists every common reason a code stops, and shows how to keep yours working for as long as the print is in use.

The short answer

  • Static QR codes do not expire. The content is stored in the pattern itself. As long as that content is still valid, the code works.
  • Dynamic QR codes do not expire on their own either, but they depend on a short link run by a service. If the service turns the link off, the code stops.
  • Most "expired" codes are not expired at all. The page they point to was moved or deleted, or the printed code can no longer be read.

If you are not sure which type you have, dynamic vs static QR codes explains the difference.

How long do static QR codes last?

Indefinitely. A static code for https://example.com/menu holds those characters in its dots. Any phone that can read QR codes can read it, today or years from now, with no account and no service involved.

What can go wrong is the content:

  • The web address stops working because the page was moved, renamed or deleted.
  • The Wi-Fi password in a Wi-Fi code was changed.
  • The phone number or email address in a contact card is out of date.

In each case the code still scans perfectly. It just delivers something that no longer works, and the only fix is to make and print a new code.

How long do dynamic QR codes last?

As long as the short link inside them keeps working. A dynamic code holds an address like siz.la/menu26, and the service behind that address sends each scan on to your real destination. That service decides whether the link stays on.

The usual reasons a dynamic code stops:

  1. The subscription ended. Some QR services turn dynamic codes off when a trial or paid plan ends, or after a set number of scans on a free tier. The printed code then opens a notice asking the owner to pay.
  2. The account or code was deleted. Deleting the code, or the account it belongs to, removes the short link.
  3. The service closed. If the company shuts down, its short links stop answering.
  4. The owner set an end date or a scan limit. Some codes are meant to stop, such as a coupon that should end on a set day.

Before printing dynamic codes in quantity, find out what your service does with them if you stop paying.

What happens to siz.la QR codes

A siz.la dynamic code is backed by a siz.la short link, and it keeps working as long as that link does. If a paid plan ends, the account moves to the free plan and its codes keep sending people where they did. Reaching a plan's monthly limit only stops new codes from being made; codes already made keep working.

A siz.la code stops working when:

  • You delete the code or its link.
  • You set the link to stop on a date or after a number of clicks.
  • The link is turned off because it points somewhere that breaks the site's rules.

Codes that are meant to expire

Sometimes you want a code to stop. A limited offer, an event check-in or a one-time download are common cases. On siz.la, any short link, including the one behind a QR code, can be set to:

  • Stop on a date and time. After that moment, scans no longer reach the destination.
  • Stop after a number of clicks. Useful for a giveaway with a fixed number of prizes.
  • Send people somewhere else once it stops. Instead of a "this link has stopped" page, people land on an address you choose, such as your current offers.

The third option is worth using whenever you set an end. A scan that leads somewhere useful is better than a dead end, especially on print that may stay up longer than planned.

Other reasons a QR code stops working

Not every failure is about links. If your phone cannot read the code at all, look at the print.

Problem What you see Fix
Destination page moved or deleted The code scans but opens a "not found" page Point a dynamic code at the new page, or reprint a static one
Printed too small The camera cannot focus or lock on Print larger; use the 10 to 1 distance rule
Not enough margin Scans fail near text or edges Leave four dots of empty space on every side
Low contrast Phones struggle in dim light Use a dark code on a light background
Light code on a dark background Some scanner apps fail Keep the code dark and the background light
Damaged, folded or faded Parts of the pattern are missing Reprint; use higher error correction for rough places
Too much covered by a logo Scans fail even up close Make the logo smaller and use high error correction
Glossy or curved surface Glare or distortion breaks the pattern Use a matte finish; keep codes off tight curves

Most of these come down to size and print quality. The QR code size guide covers how big to print for each distance, and the QR print size calculator works it out for your exact content.

Error correction helps, up to a point

Every QR code carries extra data so it can be read even when part of it is damaged or covered. There are four levels, from Low (about 7 percent of the code can be lost) to High (about 30 percent). Higher levels make the pattern denser, so the code needs to be printed a little larger. Codes with a logo in the middle should use High; siz.la switches to it automatically when you add a logo.

How to keep a QR code working

  1. Use a dynamic code for anything printed in quantity. If the destination moves, you change the link instead of reprinting.
  2. Point codes at pages you control and plan to keep. A page on your own site is safer than a link to a third-party platform that may change its addresses.
  3. Know your service's terms. Check what happens to dynamic codes when a plan ends or a trial runs out.
  4. Consider your own domain. A code on a custom domain carries your address, so you are not tied to one service's short domain.
  5. Print it big enough, with a margin. Use the print size calculator.
  6. Test the real print. Scan the printed piece from the real distance, with more than one phone, before the full run.
  7. Check it now and then. Scan codes that are in circulation every few months. On siz.la, a code whose scans suddenly drop to zero is a sign something changed.

How to fix a QR code that stopped working

  • If it is dynamic and you own it: sign in to the service, check the code is still active and change the destination if the page moved.
  • If it is static: you cannot change it. Make a new code and replace the printed ones. If the old address is on your own website, add a redirect from the old page to the new one so existing prints keep working.
  • If it does not scan at all: the problem is the print. Reprint it larger, with more contrast and a clear margin.

You can make a new code with the QR code generator, free and without signing up. Save it to a free account to make it dynamic.

FAQ

Do QR codes expire?

Static QR codes do not expire; the content is stored in the pattern. Dynamic codes last as long as the short link behind them, which depends on the service that runs it.

How long do QR codes last?

A static code lasts as long as its content is valid and the print is readable. A dynamic code lasts as long as its service keeps the link on. On siz.la, codes keep working on the free plan, so a code does not stop because a paid plan ended.

Why does my QR code say it has expired?

The code itself has not expired. Either the service behind a dynamic code turned it off, often because a trial or subscription ended, or the owner set it to stop on a date or after a number of scans.

Can an expired QR code be reactivated?

A dynamic code can, if the owner still has the account and the service allows it. A static code that points to a deleted page can only be fixed by bringing the page back or adding a redirect on that website.

Do QR codes work without internet?

The scan does. A phone can read Wi-Fi details, text or a contact card with no connection. Opening a web address, including the short link in a dynamic code, needs a connection.