How big should a QR code be printed?
Tell us how far away people will scan from, and what the code holds. You get the smallest size that scans reliably, or the distance a code of your size works from.
dots
The scan distance sets the size here: one tenth of the distance is .
The dots set the size here. Each dot needs about , which makes the code at least . The distance alone would need only .
Each dot will be about wide. Keep of empty space on every side.
At wide, the code scans from about away.
This code holds a lot, so each dot would be under and may not print or scan well. Make it larger or use a shorter link.
Each dot will be about wide, which is enough for this print quality.
A short link of about characters needs only dots. Fewer dots print bigger and scan faster.
Make a QR code with a short linkThat is more than a QR code can hold at this error correction level. Use a shorter address or a lower level.
The 10 to 1 rule
Divide the distance people stand at by ten. That is the least width the code needs, as long as it is not packed with data.
| Scanned from | Print at least | Good for |
|---|---|---|
| 20 cm (8 in) | 2 cm (0.8 in) | Business cards, labels, packaging |
| 50 cm (20 in) | 5 cm (2 in) | Menus, flyers, table tents |
| 1 m (3.3 ft) | 10 cm (4 in) | Posters indoors, shelf signs |
| 3 m (10 ft) | 30 cm (12 in) | Shop windows, wall signs |
| 10 m (33 ft) | 1 m (3.3 ft) | Banners, billboards, trucks |
Keep the link short
Fewer characters mean fewer dots, so the code can be smaller or easier to scan at the same size.
Leave the margin
Four dots of empty space on every side, with nothing printed inside it.
Test before you print
Print one at the real size and scan it from the real distance with two or three phones.
Questions people ask
How big should a QR code be?
A good rule is the 10 to 1 rule: the code should be at least one tenth as wide as the distance people scan it from. For a poster scanned from 2 meters (about 6.5 feet), print the code at least 20 cm (about 8 inches) wide. The calculator above works it out for your distance and for how much your code holds.
What is the smallest QR code size that still scans?
On a business card or a product label, a code about 2 cm (0.8 inch) wide scans well from close up, as long as it does not hold too much. Below that, each dot gets so small that a printer blurs it and a phone camera struggles to read it.
Why does a longer link need a bigger QR code?
More characters need more dots. A longer link makes the pattern denser, and denser dots are smaller at the same print size. A short link keeps the pattern simple, so it can be printed smaller and still scan fast.
How much empty space does a QR code need around it?
Leave a clear margin of at least 4 dots on every side, called the quiet zone. Text, pictures and edges that touch the code can stop a phone from finding it. The result above tells you the margin in millimeters and inches.
Does the error correction level change the size?
Yes. Higher levels repair more damage, which helps when you add a logo or the print may get scratched, but they add dots. Medium is a sound default. Use a higher level only when you need it.
What contrast and colors work best?
Dark dots on a light background, with strong contrast between them. Black on white is the safest. Light dots on a dark background does not scan on every phone, and pale colors on any background can fail.
Can I print a QR code on a curved or shiny surface?
You can, but plan for a larger code. Curves bend the pattern and gloss adds reflections, so add some extra size on top of the result and test the printed code with a few different phones before you print a large batch.
More free tools
A code you can change after it is printed
Point a QR code at a short link and change where it goes later, without printing again. See every scan by city and device.