Guides 6 min read

QR code size: the minimum size to print, and how to work it out

How small a QR code can be printed, the 10 to 1 distance rule, the quiet zone, why short links help, and sizes for cards, flyers, posters and billboards.

By The siz.la team

A QR code that is too small is worse than no code at all. People stop, raise their phone, wait, and walk away. The size that works depends on two things: how far away people stand, and how much the code holds.

This guide explains both, gives sizes for common uses, and shows why a short link lets you print a smaller code that still scans.

The short answer

  • For a code read up close, such as on a business card, print it at least 2 cm (0.8 in) wide.
  • For anything read from farther away, divide the scanning distance by 10. A code read from 1 meter needs to be about 10 cm wide.
  • Leave a margin of empty space around the code, four dots wide on every side.
  • Keep the content short. The more a code holds, the more dots it has, and the larger it has to be.

The QR print size calculator does the math for your distance and your exact content.

The 10 to 1 rule

The most common guidance is a ratio of about 10 to 1 between scanning distance and code width. If people stand 2 meters away, the code should be about 20 cm wide. If they hold it in their hand at 25 cm, 2.5 cm is enough.

The reasoning is simple. A phone camera has to see each dot clearly enough to tell dark from light. As the distance grows, every dot takes up fewer pixels in the camera image, so the dots have to be bigger to stay readable.

The rule assumes a code that is not packed with data. A dense code needs more room, which is the second half of the calculation.

Smallest QR code width by scanning distance

Scanned from Print at least Good for
20 cm (8 in) 2 cm (0.8 in) Business cards, labels, packaging
50 cm (20 in) 5 cm (2 in) Menus, flyers, table tents
1 m (3.3 ft) 10 cm (4 in) Indoor posters, shelf signs
3 m (10 ft) 30 cm (12 in) Shop windows, wall signs
10 m (33 ft) 1 m (3.3 ft) Banners, billboards, vehicles

These are minimums for a code holding a short link. Go larger when you can.

Size for common uses

Use Typical scanning distance Suggested width
Business card 20 to 30 cm 2 to 3 cm (0.8 to 1.2 in)
Product label or packaging 20 to 30 cm 2 to 3 cm (0.8 to 1.2 in)
Table tent 40 cm 4 cm (1.6 in) or more
Flyer or menu 50 to 60 cm 5 to 6 cm (2 to 2.4 in)
Poster 1 to 2 m 10 to 20 cm (4 to 8 in)
Shop window 3 to 4 m 30 to 40 cm (12 to 16 in)
Event banner 5 to 8 m 50 to 80 cm (20 to 31 in)
Billboard 10 m and up 1 m (3.3 ft) and up

A word on billboards: people driving past cannot stop to scan. A QR code on a roadside billboard only makes sense where people wait nearby, such as at a bus stop, a station platform or in a parking lot. For billboards, a short address people can remember often works better than a code.

How the content changes the size

A QR code is a grid of square dots, called modules. The smallest QR code is 21 by 21 modules. Each step up in size, called a version, adds 4 modules to each side, up to 177 by 177.

The code gets more modules when it has to hold more characters. More modules in the same printed width means each module is smaller, and small modules are harder to print and harder to scan.

Here is the difference a short link makes, at the Medium error correction level:

Content Characters Modules per side
A short link, such as https://siz.la/menu26 about 20 25
A full address with UTM tags about 150 49

The long address has nearly twice as many modules across, so each one is about half the size at the same print width. To keep the modules the same size, the long-address code would have to be printed nearly twice as wide.

How small can each module be?

Common print guidance puts the smallest reliable module at around 0.5 mm for an office printer or sticker, and around 0.35 mm for professional print. Using those figures:

  • A 25-module code needs at least about 12.5 mm on an office printer.
  • A 49-module code needs at least about 24.5 mm.

Whichever is larger, the distance rule or the module size, sets your minimum. For codes read up close, density usually wins. For codes read from across a room, distance usually wins.

This is why shortening a long link before making the code helps. If your address carries UTM parameters, shorten it first, then make the code from the short link. A dynamic QR code does this for you: it always holds a short link, whatever the destination.

The quiet zone

QR codes need a margin of empty space on every side, often called the quiet zone. The common guidance is four modules wide. Scanners use it to find where the code begins and ends.

The margin counts toward the space you need on the page. A 25-module code with a four-module margin on each side takes up 33 modules of width. At 0.5 mm a module, that is about 16.5 mm in total.

Keep text, borders, photos and patterns out of the margin. A code pushed against the edge of a card or crowded by a design element is a common reason for codes that scan in testing and fail on the printed piece.

Error correction and logos

Every QR code carries extra data so it can still be read when part of it is dirty, damaged or covered. There are four levels:

Level Roughly how much can be lost Use it for
Low 7 percent Clean, controlled surfaces
Medium 15 percent Most print
Quartile 25 percent Places where codes get scuffed
High 30 percent Codes with a logo in the middle, rough outdoor use

Higher levels add modules, so the code needs to be printed a little larger. A logo covers part of the pattern, so it needs High. The siz.la QR code generator switches to High automatically when you add a logo.

Other things that affect scanning

  • Contrast. Dark modules on a light background scan best. Light codes on dark backgrounds fail in some scanner apps.
  • Color. Colors are fine if the code is clearly darker than the background. Pale yellows and light grays are risky.
  • Surface. Gloss reflects light and causes glare. Matte finishes scan more reliably. Avoid tight curves, such as narrow bottles.
  • File format. Use a vector file such as SVG or PDF for print, so the code stays sharp at any size. PNG is fine for screens.
  • Lighting. A code in a dim corner needs to be larger, or better lit.

Test before you print

No guide replaces a real test. Print one copy at the final size, put it where it will be used, and scan it from the real distance with two or three different phones, including an older one. If any of them hesitate, go larger.

FAQ

What is the minimum size for a QR code?

For a code read up close, about 2 cm (0.8 in) wide, as long as it holds a short link. Codes that hold more data, or are read from farther away, need to be larger.

How big should a QR code be on a business card?

At least 2 cm (0.8 in), and 2.5 to 3 cm if you have room. Use a short link so the pattern stays simple, and leave a clear margin around it.

How big should a QR code be on a poster?

Divide the distance people will stand at by 10. For a poster read from 1 to 2 meters, that is 10 to 20 cm (4 to 8 in).

Does a logo make a QR code harder to scan?

It can. A logo covers part of the pattern, so the code needs High error correction and should be printed a little larger. Keep the logo small and centered.

Can a QR code be too big?

Rarely. The only limit is that the whole code must fit in the camera's view from where people stand. If people have to step back to scan it, it is too big for that spot.