Guides 7 min read

How to add a QR code to your business card

Choose between a contact card QR and a link to your page, decide what to include, and size and place the code so it scans on a small card.

By The siz.la team

A QR code on a business card saves the other person from typing your details into their phone. They scan, tap once, and you are in their contacts or on your page. Getting there takes two decisions: what the code should open, and how to fit it on a card that is only a few inches wide. This guide covers both, plus the print checks that keep a small code readable.

Two ways to set up a business card QR code

There are two common approaches. Each suits a different kind of card.

Option 1: a contact card code (vCard)

A contact card code holds your details in a standard format called vCard. When someone scans it, the phone offers to save you as a new contact with your name, number, email and the rest filled in.

This is the most direct option. It works without an internet connection, because the details sit inside the code itself.

The downside is that it is fixed. A contact card code is a static code, so if you change jobs, phone numbers or email addresses, the code on every printed card will still hold the old details. It also gets denser with every field you add, which makes it harder to scan at business card size.

The other approach is a code that opens a web page about you. That might be your website, a profile, or a link-in-bio page with your contact details, social profiles, portfolio and booking links in one place.

A siz.la bio page can include a contact card block, which shows a "Save contact" button that adds your details to the visitor's phone. So people still get the one-tap save, plus everything else you want to show them.

Make the code a dynamic code that points to your page. Then you can change the page, or even where the code goes, without reprinting a single card. You also see how many people scanned it, which is useful after a conference or trade show.

Which one to pick

  • Choose a contact card code if your details rarely change, you want the simplest possible result, and you only need the basics.
  • Choose a link to your page if you want to share more than contact details, expect your details to change, or want to know how often your card gets scanned.

What to include on a contact card code

If you go with a contact card code, keep it lean. Every field adds data, and more data means smaller dots.

The fields that matter most:

  1. First and last name, exactly as you want them saved.
  2. Phone number, with the country code if you meet people from other countries.
  3. Email address.
  4. Company and job title, so you are easy to find in a contact list later.
  5. Website, if it adds something the card does not.

An address is worth adding only if people need to visit you in person. A long street address adds a lot of data to the code.

Do not repeat everything printed on the card in the code. The code is there to save typing, not to duplicate the card.

How to make a business card QR code

For a contact card code

  1. Sign in to your siz.la account and create a new QR code.
  2. Choose Contact card as the type.
  3. Fill in your name and the fields from the list above. Leave the rest blank.
  4. Pick a design. The Business card template in the QR templates gives you a frame with "Scan to save my contact".
  5. Check that the preview says the code scans.
  6. Download it as a PDF at business card size, or as an SVG for your designer.
  1. Build your page in the link-in-bio maker and add a contact card block.
  2. Create a QR code of the Link type and paste your page address.
  3. Design the code to match your card: your colors, a dot shape, and your logo if it still scans.
  4. Save it. A saved link code is dynamic, so you can edit it and count scans later.
  5. Download it in the format your printer needs.

You can also design a plain web address code in the free QR code generator without an account, but that code is static and cannot be edited or tracked.

Size and placement on the card

A standard US business card is 3.5 by 2 inches (about 89 by 51 mm). Space is tight, so size matters more here than anywhere else.

  • Aim for at least 0.8 inches (about 2 cm) wide. Smaller codes often fail on older phones. If your code holds a lot of data, go larger.
  • Leave a clear border around the code. The quiet zone around a QR code should be at least four dots wide. Do not let text, lines or the card edge run into it.
  • Put it on the back if space is short. A clean back with the code, your name and a short line such as "Scan to save my contact" works well and keeps the front simple.
  • Keep it away from the trim edge. Printers cut cards with a small margin of error. Keep the code well inside the safe area your printer gives you.
  • Add a short instruction. A few words next to the code tell people what they will get.

A link code is usually easier to fit than a contact card code, because a short link holds far less data than a full set of contact details. That means fewer, larger dots at the same size.

Business cards are where QR codes most often fail, because the code is small and the card finishes are often fancy.

  • Use dark dots on a light background. Black or a deep brand color on white or cream is the safest choice.
  • Avoid foil, spot gloss and embossing on the code. Shiny or raised finishes reflect light and can stop a phone from reading it. Keep any special finish away from the code area.
  • Be careful with textured or dark card stock. A heavy texture can break up small dots. On dark stock, print the code inside a light box.
  • Send a vector or a print PDF. An SVG or PDF stays sharp at any size. A small PNG can blur when a printer scales it.
  • Raise error correction if you add a logo. A logo covers part of the code. Setting error correction to Q or H gives the code room to recover.

Test before you order

Order a full box of cards only after you have tested a printed copy.

  1. Print a proof at actual size on an ordinary printer, or ask your printer for a physical proof.
  2. Scan it with at least two different phones, using the built-in camera app.
  3. Scan from a normal hand-held distance and in ordinary indoor light.
  4. For a contact card code, save the contact and check every field on the phone.
  5. For a link code, open the page on mobile data and make sure the "Save contact" button works.

If the code is slow to read, make it larger, remove a field, raise the contrast or remove the logo.

FAQ

Either your contact details as a contact card, or a page about you. A contact card saves you straight to the phone. A page lets you share more and update it after the cards are printed.

How small can a QR code be on a business card?

Aim for at least 0.8 inches (about 2 cm) wide with a clear border around it. Codes with more data need to be larger. Always test a printed copy.

Can I update my business card QR code without reprinting?

Only if it is a dynamic code. A contact card code holds your details directly, so a change means new cards. A dynamic code that points to your page can be updated at any time.

Does a vCard QR code work on iPhone and Android?

Yes. Recent iPhones and Android phones read contact card codes with the built-in camera and offer to save the contact. Test on both before printing.

Should the QR code go on the front or back of the card?

Either works. The back is often better because it leaves room for a larger code and a short instruction without crowding your name and title.